Respironics REMstar Pro User Manual download pdf (Page 47)

5-5REMSTAR PRO M SERIES USER MANUAL

PROBLEM WHY IT HAPPENED WHAT TO DO

The device’s display is

erratic.

The device or

power supply has

been dropped

or mishandled,

or the device or

power supply is in

an area with high

Electromagnetic

Interference (EMI)

emissions.

Unplug the device and the power supply.

Reapply power to the device. If the problem

continues, relocate the device to an area with

lower EMI emissions (e.g., away from electronic

equipment such as cellular phones, cordless

phones, computers, TVs, electronic games, hair

dryers, etc.).

If the problem still occurs, contact your home

care provider for assistance.

Device Resets/Reboots:

The device shuts down

and restarts automati

-

cally during therapy.

(This is unlikely to occur.)

The device comes

installed with

troubleshooting

software that

automatically

monitors perfor-

mance.

Such a reset poses no danger to the patient

and assures that the patient receives prescribed

therapy throughout the night. If there is a pos-

sibility of damage to the device, the device will

shut down permanently. The product will then

display the following system error alert symbol

to indicate that the device be returned to the

home care provider for service:

The Ramp feature does

not work when you

press the Ramp button

( ).

Your home care

provider did not

prescribe Ramp for

you, or your CPAP

pressure is already

set to the mini

-

mum setting.

If Ramp has not been prescribed for you, dis-

cuss this feature with your home care provider

to see if they will change your prescription.

If your provider has enabled Ramp, but the

feature still does not work, check the CPAP set-

ting on your Active Display screen. If CPAP is set

to the minimum setting (4.0 cm H

2

O), the Ramp

feature will not work.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 63 64

Comments to this Manuals

No comments