Respironics 920M Operator's Manual download pdf (Page 27)

Choosing Calendar and Clock Settings

NOTE: Setting the month to “00” disables the calendar and clock

functions and helps conserve battery life.

1. After selecting no in the clear

memory mode, y will appear in

the SpO

display.

2. Select the year, month, day,

hour, and minute by scrolling the

Advance button through the

values. Use the On/Off button to

accept a value and move to the

next setting.

3. Press and release the On/Off

button to exit setup mode. When

the calender and clock settings

are complete, the device exits

Setup mode, and is then ready

to begin normal operation.

Figure 6: Choosing calendar and clock settings

Clear the memory?

Confirm clearing the memory?

Setting not available.

Press and release the

on/standby switch to exit setup.

Begin normal operation.

Continue to the calendar and clock settings.

(default)

Set the minute, 00 through 59.

Set the hour, 00 through 23.

Note: This is a 24-hour clock.

Set the day, 01 through 31.

Set the month, 00 through 12.

Set the year, 00 through 99.

Use the advance switch to scroll through

the values.

Use the on/standby switch to accept a value

and move to the next setting.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 88 89

No comments

Respironics 920M Operator's Manual Page 27