Respironics 920M Operator's Manual download pdf (Page 20)

14 Detailed Operation

Calendar and Clock Settings

Note:

Setting the month to “00” disables the calendar and clock functions and

helps conserve battery life

Refer to Figure 7 below for a diagram describing the calendar and clock

settings.

Choosing Calendar and Clock Settings:

1. After selecting “no” in the

memory clear settings, “y” will

appear in the SpO

display,

indicating the calendar year

setting.

2. Make the year, month, day, hour,

and minute selections. Use the

advance switch to scroll through

the values. Use the On/Standby

switch to accept a value and

move to the next setting.

3. After selecting the minutes,

“

Prn” will appear in the SpO

display. However, the “

Prn”

setting is not used at this time.

Press and release the On/Standby

switch to exit setup mode.

When the setting sequence has been

completed, the 920M PLUS displays

(two dashes). The unit is then ready

to begin normal operation.

Figure 7. Choosing calendar and clock settings.

Clear the memory?

Confirm clearing the memory?

Setting not available.

Press and release the

on/standby switch to exit setup.

Begin normal operation.

Continue to the calendar and clock settings.

(default)

Set the minute, 00 through 59.

Set the hour, 00 through 23.

Note: This is a 24-hour clock.

Set the day, 01 through 31.

Set the month, 00 through 12.

Set the year, 00 through 99.

Use the advance switch to scroll through

the values.

Use the on/standby switch to accept a value

and move to the next setting.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 30 31

Comments to this Manuals

No comments

Respironics 920M Operator's Manual Page 20

Comments to this Manuals

Related products and manuals for Measuring, testing & control Respironics 920M