Respironics BiPAP autoSV Advanced User Manual download pdf (Page 21)

User Manual

5.4 COMPLETE SETUP

Figure 5–6 shows the completed breathing circuit setup.

Breathing

Circuit

Connection

Circuit

Tubing

Patient Interface

Bacteria

Filter

(Optional)

Exhalation Port

Figure 5–6 Complete Breathing Circuit

5.5 PLUGGING THE DEVICE IN

You can use AC or DC power to operate the device.

WARNING:  e DC power option is not intended as a battery backup when using AC power.

WARNING: For proper use, the power supply must be placed feet down, in the upright position, as

shown in Figure 5–7.

5.5.1 USING AC POWER

Complete the following steps to operate the device using AC power:

1. Plug the pronged end of the AC power supply’s cord into an electrical outlet.

2.  e external AC power supply features a cord retainer to provide strain relief for the AC power cord.

Wrap the cord around the AC power supply’s cord retainer, using the wire tie supplied with your

power supply.

WARNING: Never plug the AC power supply into an outlet that is controlled by a wall switch.

WARNING: Route the wires to avoid tripping.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 47 48

No comments

Respironics BiPAP autoSV Advanced User Manual Page 21